Претраживање
Приказ резултата 1-10 од 11
KORELACIJA IZMEĐU NAČINA AKTIVIRANJA MONTMORILONITA K10 I SADRŽAJA FORMALDEHIDA U UREA-FORMALDEHIDNIM KOMPOZITIMA
(Faculty of Management Herceg Novi, 2022-05-26)
U ovom radu je izvršeno poređenje načina aktiviranja montmorilonita (MMT) K10 sa sadržajem formaldehida (FA) u urea-formaldehidnim (UF) kompozitima. Uzorci MMT-a K10 su aktivirani na dva načina: termički i pomoću sumporne ...
The influence of the modification of the montmorillonite KSF and K10 on the hydrolytic stability of UF composites
(2021-09-24)
In this work, the hydrolytic stability of composites based on the urea-formaldehyde resin (UF) and montmorillonite-MMT (K1 0 and KSF) as a formaldehyde (FA) scavenger was investigated. K10 and KSF were activated by sodium ...
The effect of UV-irradiation on the thermal stability of modified urea-formaldehyde resins with thermally activated montmorillonite
(RAD Centre, 2021-06-14)
The montmorillonite as a 2:1 smectite type clay has two tetrahedral sheets of silica sandwiching the alumina octahedral sheet. The particles of this mineral are plate-shaped with the thickness of 0.96 nm and an average ...
The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite
(Materials Research Society of Serbia, 2019-09-02)
Urea–formaldehyde (UF) resin adhesive is a polymeric condensation product of formaldehyde with urea and is considered as one of the most important wood adhesives. In spite of some advantages such as lower cost, fast curing, ...
Correlation between methods of activation of montmorilonite K10 and formaldehyde content in urea-formaldehyde composites
(Faculty of Management Herceg Novi, 2022-05-26)
In this paper, the methods of activation of montmorillonite (MMT) K10 with the content of formaldehyde (FA) in urea-formaldehyde (UF) composites are compared. MMT K10 samples were activated in two ways: thermally(physical ...
Cross-linked bio/inorganically modified urea-formaldehyde resins: influence of γ-radiation on formaldehyde content
(2022-06-13)
The effect of γ–irradiation on hydrolytic stability of nano-silica, nano-titania, and wood flour (WF) modified urea-formaldehyde (UF) resins was investigated. Modified UF resin with wood flour (Pinus silvestris L.) as ...
INFLUENCE OF MODIFIED MONTMORILLONITES ON FORMALDEHYDE CONTENT IN UREA-FORMALDEHYDE/MONTMORILLONITE COMPOSITES
(University of Novi Sad, Faculty of Technology Novi Sad, 2022-10-20)
The effect of different montmorillonites (KSF and K10) and their modifications (Na-KSF, Na-K10) on content of formaldehyde-FA (free and liberated) modified urea-formaldehyde (UF) composites was investigated. KSF and K10 ...
Hydrolytic, thermal and radiation stability of modified urea-formaldehyde composites: influence of montmorillonite particle size
(Elsevier, 2022-06-15)
Urea-formaldehyde (UF) composites with a formaldehyde/urea (FA/U) ratio = 0.8 and different particle sizes of montmorillonite (MMT), namely UF/KSF and UF/K10 were synthesized. The hydrolytic stability of modified UF ...
Hydrolytic, thermal, and UV stability of urea-formaldehyde resin/thermally activated montmorillonite nanocomposites
(Wiley, 2020-09-16)
Urea-formaldehyde resin (F/U ratio of 0.8)/thermally activated montmorillonite (UF/ΔTK10) nanocomposite was synthesized. The hydrolytical, thermal, and UV radiation stability of UF/ΔTK10 nanocomposites are determined. UF ...
Synthesis, characterization, hydrolytic, and thermal stability of urea–formaldehyde composites based on modified montmorillonite K10
(Springer, 2022-02-11)
In this study, the thermal and hydrolytic properties of composite systems based on the urea–formaldehyde resin (UF) and eco-friendly montmorillonite (K10) as formaldehyde (FA) scavenger were examined. UF resin with molar ...