Претраживање
Приказ резултата 1-10 од 17
KORELACIJA IZMEĐU NAČINA AKTIVIRANJA MONTMORILONITA K10 I SADRŽAJA FORMALDEHIDA U UREA-FORMALDEHIDNIM KOMPOZITIMA
(Faculty of Management Herceg Novi, 2022-05-26)
U ovom radu je izvršeno poređenje načina aktiviranja montmorilonita (MMT) K10 sa sadržajem formaldehida (FA) u urea-formaldehidnim (UF) kompozitima. Uzorci MMT-a K10 su aktivirani na dva načina: termički i pomoću sumporne ...
Determination of glass transition temperature and irradiation resistance of elastomeric materials based on chlorinated natural rubber
(RAD Association, 2018-06-18)
Synthetic rubbers have different surface structures but benefit from chlorination. In many cases their tensile strength and extensibility is lower than natural rubber and for that reason more easily mechanically damaged. ...
The influence of the modification of the montmorillonite KSF and K10 on the hydrolytic stability of UF composites
(2021-09-24)
In this work, the hydrolytic stability of composites based on the urea-formaldehyde resin (UF) and montmorillonite-MMT (K1 0 and KSF) as a formaldehyde (FA) scavenger was investigated. K10 and KSF were activated by sodium ...
Effect of silica on the properties of elastomeric materials based on NR/BR/SBR ternary rubber blend
(University of Banja Luka, Faculty of Technology, Banja Luka, 2018-11-02)
The effects of pyrogeneous silica on the mechanical properties of elastomeric
materials based on natural rubber (NR), polybutadiene rubber (PB) and styrene butadiene
rubber (SBR) are reported. For sample preparations the ...
Effect of silica on the properties of elastomeric materials based on NR/BR/SBR ternary rubber blend
(University in Banjaluka, Faculty of Technology, 2018-11-02)
The effects of pyrogeneous silica on the mechanical properties of elastomeric materials based on natural rubber (NR), polybutadiene rubber (PB) and styrene-butadiene rubber (SBR) are reported. For sample preparations the ...
NR/CSM/Wood flour polymer composites in railway industry
(Faculty of Mechanical Engineering Nis, 2018-10-11)
Wood flour composites can be optimized to obtain new materials for a part of the railroad infrastructure. Curing, mechanical and morphological characteristics of carbon blackand silica-filled natural ntbber (NR)/chlorosulphonated ...
The effect of UV-irradiation on the thermal stability of modified urea-formaldehyde resins with thermally activated montmorillonite
(RAD Centre, 2021-06-14)
The montmorillonite as a 2:1 smectite type clay has two tetrahedral sheets of silica sandwiching the alumina octahedral sheet. The particles of this mineral are plate-shaped with the thickness of 0.96 nm and an average ...
The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite
(Materials Research Society of Serbia, 2019-09-02)
Urea–formaldehyde (UF) resin adhesive is a polymeric condensation product of formaldehyde with urea and is considered as one of the most important wood adhesives. In spite of some advantages such as lower cost, fast curing, ...
Correlation between methods of activation of montmorilonite K10 and formaldehyde content in urea-formaldehyde composites
(Faculty of Management Herceg Novi, 2022-05-26)
In this paper, the methods of activation of montmorillonite (MMT) K10 with the content of formaldehyde (FA) in urea-formaldehyde (UF) composites are compared. MMT K10 samples were activated in two ways: thermally(physical ...
The effect of UV irradiation on hydrolytic stability of urea-formaldehyde resins filled with thermally modified montmorillonite
(RAD Centre, Niš, Serbia, 2019-06-10)
The hydrolytic stability of organic-inorganic nano-composites prepared by a two-stage
polymerization of urea-formaldehyde resin (UF) filled with thermally activated montmorillonite (MMT) has been assessed before and after ...