Претраживање
Приказ резултата 1-10 од 10
The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite
(Materials Research Society of Serbia, 2019-09-02)
Urea–formaldehyde (UF) resin adhesive is a polymeric condensation product of formaldehyde with urea and is considered as one of the most important wood adhesives. In spite of some advantages such as lower cost, fast curing, ...
The influence of the type of activation of the montmorillonite of hydrolytic stability of the urea-formaldehide nanocomposite
(University of Novi Sad, Faculty of Technology Novi Sad, 2019-10-10)
In this work the hydrolytic stability of nano-composites based on urea-formaldehyde resin (UF) and montmorillonite (K10) as formaldehyde scavenger was investigated. K10 was activated by sulfuric acid (H2SO4) with and without ...
The effect of UV irradiation on hydrolytic stability of urea-formaldehyde resins filled with thermally modified montmorillonite
(RAD Centre, Niš, Serbia, 2019-06-10)
The hydrolytic stability of organic-inorganic nano-composites prepared by a two-stage
polymerization of urea-formaldehyde resin (UF) filled with thermally activated montmorillonite (MMT) has been assessed before and after ...
The influence of montmorillonite activating method on the hydrolytic stability of urea-formaldehyde resin
(Faculty of Technology, Leskovac, 2019-10-18)
Montmorillonite clays are of great importance for processes such as adsorption and
catalysis and polymer composites fabrication . The textural properties of this filler can
be modified to increase their application. In ...
Strukturiranje elastomernih materijala za primenu u poljoprivredi
(UNIVERZITET U KRAGUJEVCU, AGRONOMSKI FAKULTET U ČAČKU, 2019-03-15)
Poljoprivreda i poljoprivredna industrija zahtevaju elastomeme proizvode koji mogu izdržati dugotrajnu izloženost ekstremnim naponima i hemikalijama. Elastomeri dobijeni od etilen-propilen-dienskog kaučuka (EPDM) nalaze ...
Properties Of Elastomeric Composites Based On Three Network Precursors
(Wiley, 2019-04-10)
The powder recycled rubber (PRR) can be used as a filler and a modifier for elastomeric materials and asphalt. Composites based on elastomers and recycled rubber powders are a serious challenge for the environment. The ...
Radiation stability and thermal behaviour of modified UF resin using biorenewable raw material-furfuryl alcohol
(Elsevier, 2019-06-15)
The thermal stability of organic-inorganic nano-composites prepared by a two-stage polymerization of urea-formaldehyde resin (UF) with furfuryl alcohol (FA) and TiO2 before and after irradiation has been researched. The ...
Biocomposites Based On Cellulose And Starch Modified Urea-Formaldehyde Resin: Hydrolytic, Thermal And Radiation Stability
(Wiley, 2019-04-10)
Two biocomposites based on cellulose (UFC) and starch modified urea formaldehyde (UFS) resin (F/U ratio of 0.8) were synthesized using the same procedure. The hydrolitical, thermal, and radiation stability of biocomposites ...
Elastomers based on NR/BR/SBR ternary rubber blend: morphological, mechanical and thermal properties
(Association of Chemical Engeneers of Serbia, 2019-01-24)
The elastomeric materials based on NR/BR/SBR ternary rubber blend were investigated. The polyisoprene (NR), butadiene (BR) and styrene butadiene (SBR) rubbers were used as network precursors and carbon black (CB) as an ...
Hybrid materials based on rubber blend nanocomposites
(Wiley, 2019-08-15)
In this applicative work, two types of silica filler were used to increase the adhesion strength between steel and elastomeric hybrid materials based on chlorosulfonated polyethylene rubber (CSM) and polychloroprene rubber ...