Претраживање
Приказ резултата 1-8 од 8
The effect of UV-irradiation on the thermal stability of modified urea-formaldehyde resins with thermally activated montmorillonite
(RAD Centre, 2021-06-14)
The montmorillonite as a 2:1 smectite type clay has two tetrahedral sheets of silica sandwiching the alumina octahedral sheet. The particles of this mineral are plate-shaped with the thickness of 0.96 nm and an average ...
The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite
(Materials Research Society of Serbia, 2019-09-02)
Urea–formaldehyde (UF) resin adhesive is a polymeric condensation product of formaldehyde with urea and is considered as one of the most important wood adhesives. In spite of some advantages such as lower cost, fast curing, ...
Correlation between methods of activation of montmorilonite K10 and formaldehyde content in urea-formaldehyde composites
(Faculty of Management Herceg Novi, 2022-05-26)
In this paper, the methods of activation of montmorillonite (MMT) K10 with the content of formaldehyde (FA) in urea-formaldehyde (UF) composites are compared. MMT K10 samples were activated in two ways: thermally(physical ...
The influence of the type of activation of the montmorillonite of hydrolytic stability of the urea-formaldehide nanocomposite
(University of Novi Sad, Faculty of Technology Novi Sad, 2019-10-10)
In this work the hydrolytic stability of nano-composites based on urea-formaldehyde resin (UF) and montmorillonite (K10) as formaldehyde scavenger was investigated. K10 was activated by sulfuric acid (H2SO4) with and without ...
The effect of UV irradiation on hydrolytic stability of urea-formaldehyde resins filled with thermally modified montmorillonite
(RAD Centre, Niš, Serbia, 2019-06-10)
The hydrolytic stability of organic-inorganic nano-composites prepared by a two-stage
polymerization of urea-formaldehyde resin (UF) filled with thermally activated montmorillonite (MMT) has been assessed before and after ...
Cross-linked bio/inorganically modified urea-formaldehyde resins: influence of γ-radiation on formaldehyde content
(2022-06-13)
The effect of γ–irradiation on hydrolytic stability of nano-silica, nano-titania, and wood flour (WF) modified urea-formaldehyde (UF) resins was investigated. Modified UF resin with wood flour (Pinus silvestris L.) as ...
A Sensitive Voltammetric Sensor for Caffeic Acid Made from Thermolised Modified UF Resins With Incorporated Fe(III) and Ti(IV) Oxide Particles
(University of Novi Sad, Faculty of Technology Novi Sad, 2022-10-20)
Domestic high performance electrode material was prepared by thermolysis of in situ synthesized urea-formaldehyde (UF) resins modified with Fe(III) nitrate and Ti(IV) oxide in different combinations: iron salt and UF resins ...
Thermolysis prepared Co3O4 carbon paste electrode decorated with single wall nanotubes as voltammetric sensor for determination of antioxidant α-lipoic acid
The novel carbon material modified with Co3O4 particles, prepared by calcination and mixed with single wall carbon nanotubes, was characterized and used for sensing of prominent antioxidant α- lipoic acid (LA). The new ...