Претраживање
Приказ резултата 1-10 од 16
Increasing the ampacity of underground power cables by an application of photovoltaic pavements," The 6th International Conference on Renewable Electrical Power Sources
(The 6th International Conference on Renewable Electrical Power Sources "6th ICREPS", 2018-10)
This article shows that a significant increase in the ampacity of an underground cable line can be achieved, if a photovoltaic pavement in combination with a ventilation channel is applied along the entire length of the ...
Solving combined economic emission dispatch problem using Adaptive Wind Driven Optimization
(Turkish Journal of Electrical Engineering and Computer Sciences, 2018-03)
In this paper, the adaptive wind driven optimization (AWDO) algorithm is applied for solving the combined economic emission dispatch (CEED) problem. AWDO is one of the newest hybrid algorithms, which optimizes the selection ...
Modelling of hydrochemical and hydromechanical parameters’ synergism in the process of solid deposit creation in geothermal and other hard waters
(Journal of the Serbian Chemical Society, 2018-01)
This paper presents the experimental research results, regarding the effect of hydromechanical parameters and based on the relative reduction of the starting hardness of geothermal water of Sijarinska Banja and Niška Banja ...
Experimental Evaluation of 300 ºC section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy
(Materials Research, 2018-03)
The paper reports comparative experimental and thermodynamic calculation of a Cu-In-Ni ternary system. An isothermal section of the Cu-In-Ni system at 300 ºC was extrapolated using optimized thermodynamic parameters for ...
Experimental Investigation of the Ternary Ge-Sn-In and Ge-Sn-Zn Systems
(Journal of Phase Equilibria and Diffusion, 2018-11)
This paper presents results of experimental examinations of alloys from the ternary Ge-Sn-In and Ge-Sn-Zn systems. Differential thermal analysis, scanning electron microscopy with energy dispersive spectroscopy and x-ray ...
Object-oriented modeling approach of universal education software
(Computer Applications in Engineering Education, 2018-01)
Since learning process could be very challenging task for scholars in this article an attempt to analyze and model a universal education software (UES) was made. The software was modeled from beginning of the life cycle ...
Measuring of cutting forces and chip shapes based on different machining parameters
(Sensor Review, 2018-05)
Purpose
The main aim of the study was to measure the cutting forces and chip shapes based on different machining parameters.
Design/methodology/approach
To get the best optimal machining conditions, it is essential ...
Estimation of tool wear according to cutting forces during machining procedure
(Sensor Review, 2018-03)
Purpose
The main purpose of the study was to analyze the relationship between cutting forces and tool wear during turning of steel 30CrNiMo8.
Design/methodology/approach
It is very important to find the optimal machining ...
Effect of temperature and exploitation time on tensile properties and plain strain fracture toughness, KIc, in a welded joint
(Procedia Structural Integrity, 2018)
Effect of temperature and exploitation time on resistance to brittle fracture of welded joint constituents of new and 40 years exploited low-alloyed Cr-Mo steel A-387 Gr. B has been analysed. The plane strain fracture ...
Innovative environmentally friendly technology for copper(II) hydroxide production
(Hemijska Industrija, 2018)
The innovative laboratory procedure for the synthesis of copper(II) hydroxide in the form of the aqueous suspension was developed. The reaction mechanism consists of the reaction between copper(II) sulphate pentahydrate ...